This hose can be routed 2 ways - either from the pump towards the passenger side of the car, back to the rear of the car, down below the turbo setup/hot exhaust area, and over to the rack ports.
You will connect the end with the 90° fitting on it to the pump using the supplied 14mm crush washer adapter fitting. This line will be shiny compared to the rest and will have the Chase Bays logo on it.
If you have a Power Steering Cooler version of any of these Power Steering Kits, scroll to the bottom of the page for that portion of your installation!Ģ. Power Steering Kit Installation Instructions:
#Bashbar e36 free
If you run into an issue due to part fitment, feel free to reach out via in the inevitable situation that the Subaru Lego Pieces did not quite go together as the forum said they would. That is great news! However, Subaru used multiple variations of PS pump inlets/outlets, racks, and subframes between the years of 2004-2007, and even more outside of that year range we specifically cater to. Always double check to make sure the line length for the Pump Feed Line works before drilling a hole/installing a rivnut.ĭisclaimer: We understand a majority of the customers buying this kit for 04-07 Subaru WRX / STi are doing some form of a Subaru based retrofit. Then mount the bracket to the front strut tower location using self-sourced hardware.
Included in the threaded holes of the Reservoir, use the 2x M8 bolts to attach the Reservoir to the Mounting Bracket. Use the supplied Reservoir and Type 3 Mounting Bracket to mount in front of the strut tower on the side of the engine that the PS Pump is installed to.